Pengaruh Tinggi Back Rest Roller Terhadap Mutu Kain Tenun Grey di Mesin Tenun Air Jet Loom Pada Industri Tekstil

Jurnal Teknovasi : Jurnal Teknik dan Inovasi

View Publication Info
 
 
Field Value
 
Title Pengaruh Tinggi Back Rest Roller Terhadap Mutu Kain Tenun Grey di Mesin Tenun Air Jet Loom Pada Industri Tekstil
 
Creator Rahma, Rana Ardila
 
Subject Journal of Textile, Industrial Engineering, Manufacture, Material Engineering
Back rest roller, ANOVA Satu Arah, Pengujian Mutu Kain, Kain Tenun, Mesin Tenun Air Jet Loom
 
Description In the weaving process, the re-positioning of the back rest roller is carried out in order to produce the right tension of the warp thread according to the fabric construction to be made and to open a clean warp mouth opening in order to produce a smooth feed post during the process. However, with the development of science, it is known that the appropriate rearrangement of different back rest roller will also affect the quality of the fabric produced. This research was conducted to see the quality of the fabric produced with different back rest roller heights on the Air Jet Loom weaving machine at PT Malakasari Textile Mills. So that it get the right height of the roller height for good quality fabric according to company needs. Observations and tests are carried out at the height of the roller rest height by adjusting different heights, there are at the heights of –1, +1, and +3 by manually raising and lowering the back rest roller so that different types of fabric samples with same construction are produced. Then the fabric sample produced is then tested on the tensile strength and stretching of the fabric towards the warp, the tear strength of the fabric towards the thickness of the fabric, and the air permeability of the fabric. Based on the results of research and statistical calculations using one-way ANOVA, it turns out that there are differences in the quality of all fabrics produced and it is found that at setting the rear height at position -1 produces the best quality fabric in terms of fabric strength. stretch of the fabric towards the warp, and the tear strength of the fabric towards the weft, with respective amounts of 310.94 N, 18.24%, and 6.30 N. However, setting the rear height at the +3 position is the most appropriate for the quality of the fabric includes the thickness of the fabric and the permeability of the fabric, with the respective sizes are 0.322 mm and 70.60 cm3/cm2/s. So it can be concluded that there are advantages and disadvantages of the various heights of the back rest rollers used for the quality of the fabric produced.
 
Publisher LPPM Politeknik LP3I Medan
 
Contributor
 
Date 2021-06-30
 
Type info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
Artikel yang dipeer-review
 
Format application/pdf
 
Identifier http://ejurnal.plm.ac.id/index.php/Teknovasi/article/view/557
 
Source Jurnal Teknovasi : Jurnal Teknik dan Inovasi; Vol 8, No 2 (2021): TEKNOVASI JUNI 2021; 54-60
Jurnal Teknovasi : Jurnal Teknik dan Inovasi; Vol 8, No 2 (2021): TEKNOVASI JUNI 2021; 54-60
2540-8389
2355-701X
 
Language ind
 
Relation http://ejurnal.plm.ac.id/index.php/Teknovasi/article/view/557/pdf
 
Coverage


 
Rights ##submission.copyrightStatement##
 

Contact Us

The PKP Index is an initiative of the Public Knowledge Project.

For PKP Publishing Services please use the PKP|PS contact form.

For support with PKP software we encourage users to consult our wiki for documentation and search our support forums.

For any other correspondence feel free to contact us using the PKP contact form.

Find Us

Twitter

Copyright © 2015-2018 Simon Fraser University Library