Potensi Karton Bekas Minuman sebagai Komposit PolyAl-Fiber

Jurnal Selulosa

View Publication Info
 
 
Field Value
 
Title Potensi Karton Bekas Minuman sebagai Komposit PolyAl-Fiber
 
Creator Rizaluddin, Andri Taufick
Rostika, Ike
Wattimena, Reza Bastari Imran
 
Subject UBC; PolyAl-fiber composite; water absorption; bending strength
 
Description Dalam rangka penanggulangan limbah karton bekas minuman (KBM), telah dikembangkan proses daur ulang untuk mengembalikannya menjadi bahan baku. Tujuan penelitian ini adalah untuk mengetahui potensi pemanfaatan KBM sebagai bahan baku komposit yang lebih tahan air, dan membandingkannya dengan spesifikasi teknis produk sejenis. Pembuatan komposit dilakukan dengan pemanasan menggunakan alat hot press pada suhu 165oC dan tekanan 25-30 kg/cm2 selama 10 menit. Produk komposit yang diperoleh memiliki nilai bending strength 12,78 MPa, bending modulus 11,60 GPa, flammability 3 cm/menit, daya serap air 2,1-14,1%, kadar air 0,9-1,9%, dan rapat massa 0,68-0,94 g/cm3, pada ketebalan 2,5-3,5 mm. Komposit PolyAl-fiber dapat memenuhi persyaratan standar papan serat, papan partikel maupun komposit kayu plastik tanpa penambahan bahan maupun proses lain, yang mengindikasikan komposit PolyAl-fiber memiliki potensi untuk digunakan dalam berbagai keperluan sejenis. Komposit PolyAl-fiber akan dapat menghasilkan papan komposit dengan kualitas lebih baik, karena lebih fleksibel, lebih tahan air, dan lebih tahan api bila dibandingkan dengan produk lain yang terbuat dari bahan baku kayu atau biomassa.Potential of Used Beverages Cartons for PolyAl-Fiber Composite AbstractVarious recycling processes have been developed to overcome the problem of used beverage carton (UBC) waste. Research was conducted to determine the potential utilization of UBC as a material for more waterproof composite and compared it to similar products. The composites were made using hot press machine at temperature of 165oC and pressure of 25-30 kg/cm2 for 10 minutes with 5% - 30% fiber content. The PolyAl-fiber composite obtained had bending strength of 12.78 MPa, bending modulus of 11.60 GPa, flammability of 3 cm/min, water absorption of 2.1-14.1%, moisture content of 0.9-1.9%, and density of 0.68-0.94 g/cm3, at thickness of 2.5-3.5 mm. The PolyAl-fiber composite could meet the requirements for fiberboard, particleboard, or plastic wood composite standards without extra additives or treatment to the raw materials, indicating that it could be used for similar purposes. The PolyAl-fiber composites may able to produce a better quality of composite boards, due to their flexible, waterproof, and fire-resistant characteristics compared to similar products made from wood or                                                                                                                                                          
 
Publisher Center for Pulp and Paper
 
Contributor
 
Date 2020-06-30
 
Type info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
Peer-reviewed Article
 
Format application/pdf
 
Identifier http://jurnalselulosa.org/index.php/jselulosa/article/view/293
10.25269/jsel.v10i01.293
 
Source JURNAL SELULOSA; Vol 10, No 01 (2020): JURNAL SELULOSA; 21-34
2527-6662
2088-7000
 
Language eng
 
Relation http://jurnalselulosa.org/index.php/jselulosa/article/view/293/284
http://jurnalselulosa.org/index.php/jselulosa/article/downloadSuppFile/293/68
http://jurnalselulosa.org/index.php/jselulosa/article/downloadSuppFile/293/69
http://jurnalselulosa.org/index.php/jselulosa/article/downloadSuppFile/293/75
 
Rights Copyright (c) 2020 JURNAL SELULOSA
http://creativecommons.org/licenses/by-nc-sa/4.0
 

Contact Us

The PKP Index is an initiative of the Public Knowledge Project.

For PKP Publishing Services please use the PKP|PS contact form.

For support with PKP software we encourage users to consult our wiki for documentation and search our support forums.

For any other correspondence feel free to contact us using the PKP contact form.

Find Us

Twitter

Copyright © 2015-2018 Simon Fraser University Library