Analisis Kekuatan Miniatur Sasis Bus Hasil Teknologi Fused Deposition Modelling dengan Metode Elemen Hingga

Manutech : Jurnal Teknologi Manufaktur

View Publication Info
 
 
Field Value
 
Title Analisis Kekuatan Miniatur Sasis Bus Hasil Teknologi Fused Deposition Modelling dengan Metode Elemen Hingga
 
Creator Prihadianto, Braam Delfian
Koswara, Ari Reza
 
Subject finite element
solidworks
PLA
fused deposition modelling
plastic deformation
 
Description Replica is an imitation of an object that is scaled down to a specified scale. Replica manufacturing can be done by layer manufacturing technology so that it is more efficient and gets products similar to the originals. At present, the information about the results of the experimental testing process by computers on replica 3D models is still very limited. It is important to know that the replica have the expected quality. This study was conducted to determine the replica strength of the Hino RN 285 bus chassis 1:19 scale with PLA and AISI 1020 material. The calculations included stresses and deflections that occurred on the replica bus chassis due to the load from the replica cabin of 25.506 N. The study was conducted using Solidworks 2018 application for static load simulation process and for knowing the maximum stress and deflection that occurred. The simulation results obtained a maximum strenght value of 9,628 MPa. Deflection occurs at the front overhang, wheel base, and rear overhang with a maximum value occurs at the rear overhang of 0.7696 mm and causes stress distribution on the chassis frame of the rear overhang at 2.407 MPa. The maximum stress of the test results has a value smaller than the yield stress of the material and the deflection that occurs is below the critical deflection range, so it can be concluded that the replica model of the bus chassis is safe.
 
Publisher Politeknik Manufaktur Negeri Bangka Belitung
 
Date 2020-12-07
 
Type info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
Peer-reviewed Article
 
Format application/pdf
 
Identifier http://ejournal.polman-babel.ac.id/index.php/manutech/article/view/129
10.33504/manutech.v12i01.129
 
Source Manutech : Jurnal Teknologi Manufaktur; Vol. 12 No. 01 (2020); 36-43
2621-3397
2089-5550
10.33504/manutech.v12i01
 
Language eng
 
Relation http://ejournal.polman-babel.ac.id/index.php/manutech/article/view/129/100
 
Rights http://creativecommons.org/licenses/by-nc-nd/4.0
 

Contact Us

The PKP Index is an initiative of the Public Knowledge Project.

For PKP Publishing Services please use the PKP|PS contact form.

For support with PKP software we encourage users to consult our wiki for documentation and search our support forums.

For any other correspondence feel free to contact us using the PKP contact form.

Find Us

Twitter

Copyright © 2015-2018 Simon Fraser University Library