The Recycling of Sawdust Waste into Particleboard Using Starch-Based Modified Adhesive

Communication in Physical Sciences

View Publication Info
Field Value
Title The Recycling of Sawdust Waste into Particleboard Using Starch-Based Modified Adhesive
Creator Emmanuel Michael Umoh
Edidiong Sunday Sam
Authors: Emmanuel Michael Umoh* and Edidiong Sunday Sam
Received 02 November 2020, Accepted 17 November 2020
The challenges associated with the management of wastes from the cassava processing and timber industries necessitated an investigation into the possibility of implementing recycling approach to produced particle board from these wastes. Particleboards were produced from wood saw dust using various compositions of modified starch adhesives. The product obtained were evaluated for density, moisture content, hardness, flexural strength, water absorption and thickness swelling. The results obtained indicated that the density ranged from 753 to 798 kg/m3, moisture content ranged from 14.87 to 16.67 %, hardness ranged from 9.02 to 9.31 N/nm2, flexural strength ranged from 1.31 to 1.45 MPa, water absorption capacity at 24 h ranged from 1.06 to 9.31 %, thickness swelling ranged from 4.55 to 4.78%. The products were in conformity with IS 3087 (2005) and ANSI A 208.1 (1993) standards and could go for medium density particleboard.
Publisher University Of Nigeria Nsukka
Date 2020-11-19
Type info:eu-repo/semantics/article
Format application/pdf
Source Communication in Physical Sciences; Vol. 6 No. 1 (2020): VOLUME 6(ISSUE 1)
Language eng
Rights Copyright (c) 2010 The Journal and the author

Contact Us

The PKP Index is an initiative of the Public Knowledge Project.

For PKP Publishing Services please use the PKP|PS contact form.

For support with PKP software we encourage users to consult our wiki for documentation and search our support forums.

For any other correspondence feel free to contact us using the PKP contact form.

Find Us


Copyright © 2015-2018 Simon Fraser University Library