Analisis Ketepatan Pengukur Daya dan Faktor Daya Listrik Berbasis Arduino Uno R3 328P


View Publication Info
Field Value
Title Analisis Ketepatan Pengukur Daya dan Faktor Daya Listrik Berbasis Arduino Uno R3 328P
Creator Agustianingsih, Wilda Noer
Kurniawan, Freddy
Setiawan, Paulus
power meter, power factor meter, microcontroller ATmega 328P, arduino
Description Electric power and power factor are two parameters that must be considered because they involve the quality of the energy consumed. In order to be able to analyze these, a microcontroller-based power and power factor meter are needed which can be further developed. In this research, a power and power factor meter based on the ATmega328P microcontroller was developed on the Arduino board. Several algorithms are used to calculate the frequency of the grids, as well as the true-RMS of voltage and current. The simulation results show that this system can measure the power and power factor for input voltages of 100 to 300 volts with a frequency of 45 to 156 Hz for loads up to 5 amperes. The mean calculation average error for linear load is 0.28% for active power and -0.33% for apparent power. Meanwhile, for nonlinear loads, the calculation average error for active power is 1.86% and apparent power is 0.47%.
Publisher Sekolah Tinggi Teknologi Adisutjipto
Date 2020-11-17
Type info:eu-repo/semantics/article
Peer-reviewed Article
Format application/pdf
Source AVITEC; Vol 3, No 1 (2021): Februari 2021; 15-28
Language eng
Rights Copyright (c) 2020 AVITEC

Contact Us

The PKP Index is an initiative of the Public Knowledge Project.

For PKP Publishing Services please use the PKP|PS contact form.

For support with PKP software we encourage users to consult our wiki for documentation and search our support forums.

For any other correspondence feel free to contact us using the PKP contact form.

Find Us


Copyright © 2015-2018 Simon Fraser University Library