Desain dan Simulasi Elemen Hingga Gantry Crane Kapasitas 9 Ton Menggunakan Autodesk Inventor 2017

Manutech : Jurnal Teknologi Manufaktur

View Publication Info
 
 
Field Value
 
Title Desain dan Simulasi Elemen Hingga Gantry Crane Kapasitas 9 Ton Menggunakan Autodesk Inventor 2017
 
Creator Wibawa, Lasinta Ari Nendra
 
Description Currently, the gantry crane in LAPAN Garut still uses steel material. The steel material is protected using a coating to minimize the impact of corrosion. However, this method is less efficient, considering the corrosion rate in LAPAN Garut is very high because it is located on the coast of Cilauteureun. It also creates problems in terms of maintenance because it has to be done regularly and periodically repainting. In addition, not all equipment is available maintenance funds every year. The objective of this paper is to design and analyze the stress of a gantry crane with a capacity of 9 tons using Aluminum 6061 material. The material used is three units of JIS G 3192 H standard frame (I-shape) with a size of 150 x 150 x 7 mm, four units of JIS G 3466 frame (square profile) with a size of 150 x 150 x 6 mm, and four units of JIS G 3466 frame (square profile) with a size of 125 x 125 x 6 mm. Finite element analysis is performed using Autodesk Inventor Professional 2017 software. The simulation results show that the gantry crane has a mass, von Mises stress, deformation, and safety factors respectively at 165.36 kg; 132.9 MPa; 13.67 mm; and 2.07.
Saat ini gantry crane di LAPAN Garut masih menggunakan material baja. Material baja tersebut dilindungi menggunakan cat pelapis untuk meminimalkan dampak korosi. Namun, metode ini kurang efisien mengingat laju korosi di LAPAN Garut sangat tinggi karena terletak di pesisir Pantai Cilauteureun. Hal ini juga menimbulkan masalah dalam hal perawatan karena harus dilakukan pengecatan ulang secara teratur dan berkala. Selain itu, tak semua peralatan tersedia dana perawatan setiap tahun. Tujuan dari makalah ini adalah mendesain dan menganalisis tegangan dari gantry crane dengan kapasitas 9 ton menggunakan material Aluminium 6061. Material yang digunakan adalah tiga unit rangka standar JIS G 3192 H (I-shape) dengan ukuran 150 x 150 x 7 mm, empat unit rangka JIS G 3466 (square profile) dengan ukuran 150 x 150 x 6 mm, dan empat unit rangka JIS G 3466 (square profile) dengan ukuran 125 x 125 x 6 mm. Analisis elemen hingga dilakukan dengan menggunakan perangkat lunak Autodesk Inventor Professional 2017. Hasil simulasi menunjukkan bahwa gantry crane memiliki massa, tegangan von Mises, deformasi, dan faktor keamanan berturut-turut sebesar 165,36 kg; 132,9 MPa; 13,67 mm; dan 2,07.
 
Publisher Politeknik Manufaktur Negeri Bangka Belitung
 
Date 2019-12-26
 
Type info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
Peer-reviewed Article
 
Format application/pdf
 
Identifier http://ejournal.polman-babel.ac.id/index.php/manutech/article/view/108
10.33504/manutech.v11i2.108
 
Source Manutech : Jurnal Teknologi Manufaktur; Vol 11 No 02 (2019): Manutech : Jurnal Teknologi Manufaktur; 41-48
2621-3397
2089-5550
10.33504/manutech.v11i02
 
Language eng
 
Relation http://ejournal.polman-babel.ac.id/index.php/manutech/article/view/108/91
 
Rights Copyright (c) 2019 Manutech : Jurnal Teknologi Manufaktur
http://creativecommons.org/licenses/by-nc-nd/4.0
 

Contact Us

The PKP Index is an initiative of the Public Knowledge Project.

For PKP Publishing Services please use the PKP|PS contact form.

For support with PKP software we encourage users to consult our wiki for documentation and search our support forums.

For any other correspondence feel free to contact us using the PKP contact form.

Find Us

Twitter

Copyright © 2015-2018 Simon Fraser University Library