Rancang Bangun Alat Pemeriksa Run Out Roda Gigi menurut Standar ISO 1328

Jurnal Teknologi dan Rekayasa Manufaktur (JTRM)

View Publication Info
 
 
Field Value
 
Title Rancang Bangun Alat Pemeriksa Run Out Roda Gigi menurut Standar ISO 1328
 
Creator Gunawan, Iwan
Adi Soetopo, Antonius
Romadhona Prayoga, Rahmat
 
Subject Run Out Roda Gigi
Sensor LVDT
Mikrokontroller
Arduino
Radial Composite Error
ISO1328
Run out roda gigi
Sensor LVDT
Mikrokontroler arduino
Radial composite Error
ISO 1328
 
Description One of the parameters is the reference to the quality of the gear that is run out. Run out is the change in the location of the current element rotates against a fixed point on the axis of reference. The method used to check for errors swivel gear that is by turning the gears are checked with the master gear. Checker tool run out of gears using stepper motors as gear and readings players run out using LVDT sensors. Mechanical construction specifications that is thedistance between spindle capacity maximum 170 mm. Maximum run out that can be read by the LVDT sensor is 3.50 mm. The operating system uses an interface program that can be adapted to the gear to be checked. Inspection run out gear carried on a pair of straight gears are split into two parts with module 2, number of teeth 34. The examination was conductedat four different gear positions, tolerance RCE (radial composite error) allowed for automotive applications (ISO grade 8) is0.09 mm, where the measurement results obtained from the smallest RCE at position 3 (1A on z-1 and 1B on the z -19) at 0.10 mm so we can say that the measured gear can not be used for automotive applications because the measured RCE exceed permissible limits.
Power Train Otomotif (P3TO) Polman Bandung saat ini dilakukan pengembangan berupa gearbox utility vehicle. Salah satu parameter yang menjadi acuan pada kualitas produk roda gigi yaitu run-out. Berdasarkan standar ISO 1328:1976, Run Out of Gear adalah metode pemeriksaan penyimpangan kesalahan putar  RCE (radial composite error)  pada sepasang roda gigi. Rancang BangunAlat pemeriksa run out ini dibuat dengan prinsip kerja roda gigi diputar motor stepper dan pembacaan run-out digunakan sensor LVDT (linear variable differential transformator) melalui program software interface mikrokontroler Arduino. Sehingga dihasilkan data aktual nilai pengukuran run out sepasang roda gigi dalam  bentuk grafik file (.csv) dan (.txt). Pada  alat pemeriksa run out ini dilakukan  pemeriksaan RCE terhadap sepasang roda gigi Otomotif ISO grade 8 (modul 2, Z=34, toleransi RCE = 0.09 mm ) . Berdasarkan Hasil pengukuran didapatkan RCE  sebesar 0.10 mm. Hasil analisa penyimpangan RCE tersebut diakibatkan akumulasi penyimpangan toleransi ketegak-lurusan dan kesejajaran sumbu serta dimensi geometri profil roda gigi saat proses pembuatan produk roda gigi.
 
Publisher Politeknik Manufaktur Bandung (Polman Bandung)
 
Date 2019-12-23
 
Type info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
 
Format application/pdf
 
Identifier https://jtrm.polman-bandung.ac.id/index.php/JTRM/article/view/12
10.48182/jtrm.v1i2.12
 
Source Jurnal Teknologi dan Rekayasa Manufaktur ; Vol 1 No 2 (2019): Vol 1 No 2 (2019): Volume: 1 | Nomor: 2 | Oktober 2019; 29-40
2715-016X
2715-3908
 
Language ind
 
Relation https://jtrm.polman-bandung.ac.id/index.php/JTRM/article/view/12/8
 
Rights Copyright (c) 2019 Politeknik Manufaktur Bandung
https://creativecommons.org/licenses/by-nc-sa/4.0
 

Contact Us

The PKP Index is an initiative of the Public Knowledge Project.

For PKP Publishing Services please use the PKP|PS contact form.

For support with PKP software we encourage users to consult our wiki for documentation and search our support forums.

For any other correspondence feel free to contact us using the PKP contact form.

Find Us

Twitter

Copyright © 2015-2018 Simon Fraser University Library