Effects of flat-bar support on in-plane fluidelastic instability of a parallel triangular tube array subjected to air-water flow

9th Symposium on Fluid-Structure Interactions, Flow-Sound Interactions, Flow-Induced Vibration & Noise

View Publication Info
 
 
Field Value
 
Title Effects of flat-bar support on in-plane fluidelastic instability of a parallel triangular tube array subjected to air-water flow
 
Creator Teguewinde Sawadogo; Canadian Nuclear Laboratories Limited (CNL)
Bruce Smith
 
Subject Tube arrays; tube bundles; fluidelastic instability; in-plane FEI; streamwise FEI;
 
Description Flat-bar supports have frequently been used to control transverse vibration of tubes in the U-bend region of recirculating steam generators. Recently, it was discovered that the frictional effects of these flat bars are not always sufficient to prevent streamwise or in-plane (IP) fluidelastic instability (FEI). Due to the highly nonlinear nature of the tube-support interaction, the parameters that control the vibration in the IP direction (support clearance and preloads), have not been well characterized. In order to improve the characterization and modelling of tube-support interaction effects, CNL has developed experimental facilities that allow better control of tube and support positions and has improved its numerical models.This paper investigates the parameters controlling IP FEI through experimental measurements and numerical modelling. Experiments were conducted on a straight tube bundle in a parallel triangular configuration with a pitch ratio of 1.5. The tubes were fixed at one end while, at the other end, flat bars were accurately positioned with respect to the tubes to control their vibration in the transverse direction. The effects of the support clearance and preload were investigated. Support clearance was varied by changing the thickness of the flat bars while relative position and preload were controlled by the precise lateral position of the flat bars. Tests were conducted in air-water flow for various void fractions. For each combination of support, preload and void fraction, the flow velocity was varied and the vibration of the free ends of all the tubes was measured using a high speed camera. FEI behaviour and thresholds were determined based on the vibration amplitude.Numerical simulations were also conducted to use the test data for validating the numerical model. FEI was modelled using the quasi-steady approach with inter-tube coupling. The tube-support contact normal force was modelled using a spring-damper system while the friction was modelled using two friction models: the velocity-limited friction model and force balance friction model. The results demonstrate that the model can reproduce the experimental results with acceptable accuracy.
 
Publisher Paper Management System for FIV2018
 
Contributor
 
Date 2018-06-05 17:02:12
 
Type Peer-reviewed Paper
experimental; numerical
 
Format application/pdf
 
Identifier http://www.fiv2018.com/ocs/index.php/fiv2018/fivcan/paper/view/195
 
Source Paper Management System for FIV2018; FIV2018 Conference
 
Language en
 
Rights Authors who submit to this conference agree to the following terms:<br /> <strong>a)</strong> Authors retain copyright over their work, while allowing the conference to place this unpublished work under a <a href="http://creativecommons.org/licenses/by/3.0/">Creative Commons Attribution License</a>, which allows others to freely access, use, and share the work, with an acknowledgement of the work's authorship and its initial presentation at this conference.<br /> <strong>b)</strong> Authors are able to waive the terms of the CC license and enter into separate, additional contractual arrangements for the non-exclusive distribution and subsequent publication of this work (e.g., publish a revised version in a journal, post it to an institutional repository or publish it in a book), with an acknowledgement of its initial presentation at this conference.<br /> <strong>c)</strong> In addition, authors are encouraged to post and share their work online (e.g., in institutional repositories or on their website) at any point before and after the conference.
 

Contact Us

The PKP Index is an initiative of the Public Knowledge Project.

For PKP Publishing Services please use the PKP|PS contact form.

For support with PKP software we encourage users to consult our wiki for documentation and search our support forums.

For any other correspondence feel free to contact us using the PKP contact form.

Find Us

Twitter

Copyright © 2015-2018 Simon Fraser University Library