Penentuan Faktor – Faktor Berpengaruh Terhadap Kualitas Kuat Tekan Bata Ringan Dengan Metode Statistical Process Control (SPC) Dan Metode Taguchi

International Conference on Dublin Core and Metadata Applications

View Publication Info
 
 
Field Value
 
Title Penentuan Faktor – Faktor Berpengaruh Terhadap Kualitas Kuat Tekan Bata Ringan Dengan Metode Statistical Process Control (SPC) Dan Metode Taguchi
 
Creator Wicaksono, Bayu Arif
Sulistiyowati, Wiwik
 
Subject Quality Management System
compressive strength , Statistical Process Control , Taguchi Methods.
Statistical Process Control, Taguchi Method, Six SIgma
 
Description PT.Viccon Modren Industries is a company engaged in the brick industry light . Problems often arise during the process of making light brick is a lightweight brick compressive strength is not in accordance with company standards for ˃3,50 N / mm² , so the quality is not optimal light brick .             In an effort to overcome these problems , it is necessary to control the production of Online Quality Control with Statistical Process Control methods to identify the root of the problems that occur in the production of lightweight brick . Statistical tools in Statistical Process Control methods include check sheets , Pareto charts , cause-effect diagrams , and maps control p . Then the data Statistical Process Control is integrated with the Taguchi method as Offline Quality Control to be used as a parameter in determining the factors that have significant influence in the optimization of compressive strength of lightweight brick.             Based on the research showed that the factors significantly influence the light brick compressive strength is the amount of cement and gypsum number . Combination level of the factors that resulted in the average value and variance of compressive strength of lightweight brick that is optimal is the same , namely the setting factor water volume at level 2 for 150 Liter ( A2 ) , factor the amount of silica sand on level 2 of 550 Kg ( B2 ), cement jumalah factor on level 3 of 350 Kg ( C3 ) , as well as gypsum julah factor on level 3 of 300 Kg ( D3 ). Keywords : compressive strength , Statistical Process Control , Taguchi Methods.
 
Publisher Universitas Muhammadiyah Sidoarjo
 
Contributor
 
Date 2017-04-06
 
Type info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
Peer-reviewed Article

 
Format application/pdf
 
Identifier http://ojs.umsida.ac.id/index.php/prozima/article/view/706
10.21070/prozima.v1i1.706
 
Source PROZIMA (Productivity, Optimization and Manufacturing System Engineering); Vol 1, No 1 (2017): June; 50-58
2541-5115
10.21070/prozima.v1i1
 
Language eng
 
Relation http://ojs.umsida.ac.id/index.php/prozima/article/view/706/551
 
Coverage


 
Rights Copyright (c) 2017 PROZIMA (Productivity, Optimization and Manufacturing System Engineering)
http://creativecommons.org/licenses/by/4.0
 

Contact Us

The PKP Index is an initiative of the Public Knowledge Project.

For PKP Publishing Services please use the PKP|PS contact form.

For support with PKP software we encourage users to consult our wiki for documentation and search our support forums.

For any other correspondence feel free to contact us using the PKP contact form.

Find Us

Twitter

Copyright © 2015-2018 Simon Fraser University Library