ANALISIS EFISIENSI BAHAN BAKAR TERHADAP MOTOR BENSIN PADA MESIN PENGGILING PADI TYPE CMH 350

Nozzle : Journal Mechanical Engineering

View Publication Info
 
 
Field Value
 
Title ANALISIS EFISIENSI BAHAN BAKAR TERHADAP MOTOR BENSIN PADA MESIN PENGGILING PADI TYPE CMH 350
 
Creator Syarif, Syarifudin; Politeknik Harapan Bersama Scopus ID : 5721728238
 
Subject Fuel, rpm, Rice Grinder, Grain.
 
Description The combustion mechanism is strongly influenced by the state of the overall combustion process where the atoms of the components can react with oxygen and form products in the form of gases. If oxygen and hydrocarbon do not mix well, there will be a cracking process in which smoke will appear on the flame. The purpose of this study was to calculate the efficiency of the rice milling machine and determine the quality of the rice produced from the rice milling machine. So that the engine settings are obtained, especially on the appropriate fuel for optimal results. This study uses an experimental method, by doing a comparison of 3 different fuels and 3 different engine speeds. The results of fuel consumption at 2500, 3000, and 3500 rpm using pertalite, Pertamax, and Pertamax turbo fuels, showed that the quality of fuel testing was more efficient on Pertamax turbo fuel because Pertamax turbo fuel consumed 7.33 ml at 2500 rpm, 9.67 ml at 3000 rpm, and 11.67 ml at 3500 rpm. While pertalite fuel consumed 10.67 at ml 2500 rpm, 14.67 at ml 3000 rpm, and 16.33 at 3500 rpm, Pertamax consumed 8.67 ml at 2500 rpm, 11.67 ml at 3000 rpm, 13.67 at 3500 rpm, and 13.67 at 3500 rpm. For the category of the cheapest price on pertalite fuel at IDR 7,650 because Pertamax fuel is IDR 9,850 and Pertamax turbo is IDR 11,200. The results of the fuel test show that of the three fuels that are efficient on Pertamax fuel with 3000 rpm because it affects the milling results. Factors include: The fuel used affects fuel consumption in the form of different octane values and it takes a shorter time to carry out the milling process so that the resulting milling capacity is better.
 
Publisher Politeknik Harapan Bersama Tegal
 
Contributor
 
Date 2021-07-31
 
Type info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
Peer-reviewed Article
 
Format application/pdf
 
Identifier http://ejournal.poltektegal.ac.id/index.php/nozzle/article/view/2819
10.30591/nozzle.v10i2.2819
 
Source Nozzle : Journal Mechanical Engineering; Vol 10, No 2 (2021): Nozzle : Journal Mechanical Engineering; 55-58
2301-6957
10.30591/nozzle.v10i2
 
Language ind
 
Relation http://ejournal.poltektegal.ac.id/index.php/nozzle/article/view/2819/pdf_3
 
Rights Copyright (c) 2021 Nozzle : Journal Mechanical Engineering
http://creativecommons.org/licenses/by/4.0
 

Contact Us

The PKP Index is an initiative of the Public Knowledge Project.

For PKP Publishing Services please use the PKP|PS contact form.

For support with PKP software we encourage users to consult our wiki for documentation and search our support forums.

For any other correspondence feel free to contact us using the PKP contact form.

Find Us

Twitter

Copyright © 2015-2018 Simon Fraser University Library