Impact of Cutting Environments on Sustainable Machining of H13 Tool Steel Alloy

FUOYE Journal of Engineering and Technology

View Publication Info
 
 
Field Value
 
Title Impact of Cutting Environments on Sustainable Machining of H13 Tool Steel Alloy
 
Creator Balogun, Vincent A
Edem, Isuamfon F
Bassey, Etimbuk B
 
Description The use of electrical energy and coolants/lubricants has been widely reported in mechanical machining. However, increased research and process innovation in high speed machining has brought about optimised manufacturing cycle times. This has promoted dry machining and the use of minimum quantity lubrication (MQL). This work understudies the impact of different cutting environments in machining H13 tool steel alloys at transition speed regime with emphasis on sustainable machining of the alloy. To achieve this, end milling tests were performed on AISI H13 steel alloy (192 BHN) on a MIKRON HSM 400 high speed machining centre using milling inserts. After each cutting pass, the milling insert was removed for tool wear measurement on the digital microscope. The electrical power consumed was measured with the Fluke 435 power clamp meter mounted on the three phase cable at the back of the machine. It was discovered that MQL has a promising advantage in terms of tool life with 25 minutes of machining, net power requirement of 10% when compared to dry cutting, and environmental benefits when machining H13 tool steel alloy. This work is fundamentally important in assessing the environmental credentials and resource efficiency regime for green machining of H13 tool steel alloysKeywords— H13 tool steel, green machining, process optimization, tool life, cutting environments, energy consumption 
 
Publisher Federal University Oye-Ekiti
 
Contributor N/A
 
Date 2020-09-30
 
Type info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion

 
Format application/pdf
 
Identifier http://engineering.fuoye.edu.ng/journal/index.php/engineer/article/view/497
10.46792/fuoyejet.v5i2.497
 
Source FUOYE Journal of Engineering and Technology; Vol 5, No 2 (2020): FUOYE Journal of Engineering and Technology Vol.5 Iss. 2 (Sept 2020 issue)
2579-0625
2579-0617
 
Language eng
 
Relation http://engineering.fuoye.edu.ng/journal/index.php/engineer/article/view/497/pdf
 
Rights Copyright (c) 2020 The Author(s)
http://creativecommons.org/licenses/by-nc/4.0
 

Contact Us

The PKP Index is an initiative of the Public Knowledge Project.

For PKP Publishing Services please use the PKP|PS contact form.

For support with PKP software we encourage users to consult our wiki for documentation and search our support forums.

For any other correspondence feel free to contact us using the PKP contact form.

Find Us

Twitter

Copyright © 2015-2018 Simon Fraser University Library