Urban Climate Design: Improving thermal comfort in Dutch neighbourhoods

A+BE | Architecture and the Built Environment

View Publication Info
 
 
Field Value
 
Title Urban Climate Design: Improving thermal comfort in Dutch neighbourhoods
 
Creator Kleerekoper, Laura; TU Delft, Architecture and the Built Environment
 
Subject architectural engineering; technology; urbanism; urban climate;
climate; climate adaptation; design; climate design; urban planning; urban morphology; urban microclimates
72
 
Description This thesis presents research into the possibilities for climate adaptation in Dutch urban areas. We want to know how cities can best prepare for extreme rainfall, droughts, and heat waves in future climates. These events are likely to become more frequent and more extreme. The focus is on heat resistance as this has been a neglected concept in Dutch urban planning.The aim of this study is to extend our knowledge of the effects of climate-adaptation measures and to stimulate the implementation of such measures in the design of public space. Anticipating on the effects of climate change, the research was guided by the question: Which urban design principles can be applied in specific Dutch neighbourhoods to respond to the effects of climate change, especially in terms of outdoor thermal comfort and water management?The three stages of the project are: A literature review of existing knowledge on climate adaptation and knowledge gapsResearch into the specific field of urban climatologyApplied research on the broader field of urban planningThe urban climate and adaptation measuresIn the evaluation of measures for climate robust urban areas it is important to gauge the extent of the effects of such measures. These effects are generally expressed in terms of air temperature. However, the comparison of results of measures from various studies is not a simple matter: there are significant differences in spatial, climatological and methodological variations adopted in these studies. Bringing results together from very specific studies may give an impression of the potential of certain measures. For example, most studies support the idea that greening has the highest effect on thermal comfort as it provides both shade and active cooling due to ‘evapotranspiration’1. Nevertheless, vegetation can also retain heat, as we can feel after sundown. Other measures that were investigated for their effects are water, urban morphology, materials and colour.Simulations and measurementsContextual aspects and combinations of measures can seriously influence the effects of measures. To get a grip on such effects and their co-occurrence (interrelations), possible adaptations to an existing rural configuration were modelled and their effects on the microclimate were simulated using the numerical program ENVI-met. It is demonstrated that, for instance, trees combined with highly reflective façades do often not provide cooling, whereas trees combined with moderate façade colouring does.To assess the effects of a single measure, independent of its context, single parameter simulations of thermal comfort (PET) were performed. This is the first time that such a comparative study was undertaken in The Netherlands. The complexity of the situations was increased gradually from an empty field with only pavement or only grass, to pavement with grass and a single building, moving up to a building with a few trees to many trees, multiple buildings and built forms. During this study it became clear that airflow has a significant influence on the comfort temperature. However, cooling by means of creating drafts on a mesoscale is difficult to manage and control. The low wind speed, which is typical for Dutch heat waves, provides ventilation through thermal stratification. Airflow between warm and cool spaces only occurs with sufficient temperature differences and low wind speed. This principle was investigated on the side towards new measures because little is known about the effects of generating airflow as a result of façade colour. Measurements were performed first in a small-scale experiment in a controlled area and when results seemed promising this was extended to a full-scale situation on an average Summer’s day. Research designIn current practice, urban design pays little or no attention to the urban microclimate and urban-heat stress. Designers indicate that they have insufficient knowledge and evaluation instruments. The design study discussed in the third part of this thesis provides examples of climate adaptive applications and suggestions for design strategies.Using urban typologies makes it possible to integrate the microclimate in the design without needing urban microclimate expertise. By analysing specific neighbourhood typologies applying a variety of microclimate indicators three simple distinctive parameters emerge: balance between pavement and natural surfaces;building height;built form.Design solutions were applied to reveal spatial implications for most of the neighbourhoods in the analysis and serve as examples and a source of inspiration. Promising and neighbourhood-specific measures were selected per neighbourhood type to support the design process.To demonstrate how microclimates can be managed with design choices, a design case was developed in more detail for three cities. Prioritizing measures at the design stage depends on many external and intrinsic factors. The three designs in this thesis follow the same path: analysis > maximisation > optimisation > integration. When maximization focuses on thermal comfort only design measures concerning this aspect are applied. Prioritization can be applied in a three-step strategy of: warming prevention, passive cooling and active cooling. The design process is an iterative process in which promising combinations may be found in the optimization and this may require additional analysis.This thesis hopes to build bridges between knowledge and science and the practice of the design of public space. That goal is approached with a product that unfolds from the three parts of the study: Factsheets to simply check and evaluate mechanisms and affordances of measures;Guidelines for the further development of knowledge of and design with urban microclimates;A categorized set of measures to be able to select the right measure for the right neighbourhood typology.The study is part of a consortium of complementary research projects and stakeholders with the aim to generate knowledge through research as input for councils and other stakeholders. In addition, three participating municipal councils have gained further insight into cases that were proposed by them.  
 
Publisher TU Delft Open
 
Contributor
 
Date 2016-07-01
 
Type info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion

design; engineering
 
Format application/pdf
 
Identifier http://journals.library.tudelft.nl/index.php/faculty-architecture/article/view/kleerekoper
10.7480/abe.2016.11
 
Source A+BE | Architecture and the Built Environment; No 11 (2016): Urban Climate Design; 1-424
A+BE | Architecture and the Built Environment; No 11 (2016): Urban Climate Design; 1-424
2214-7233
2212-3202
 
Language eng
 
Relation http://journals.library.tudelft.nl/index.php/faculty-architecture/article/view/kleerekoper/pdf_kleerekoper
10.7480/abe.2016.11.1336
 
Coverage Netherlands

building technology; urbanism
 
Rights Copyright (c) 2016 Laura Kleerekoper
http://creativecommons.org/licenses/by/4.0
 

Contact Us

The PKP Index is an initiative of the Public Knowledge Project.

For PKP Publishing Services please use the PKP|PS contact form.

For support with PKP software we encourage users to consult our wiki for documentation and search our support forums.

For any other correspondence feel free to contact us using the PKP contact form.

Find Us

Twitter

Copyright © 2015-2016 Simon Fraser University Library