Pengaruh Sudut Punch dan Ketebalan Pelat terhadap Springback pada Bending V

Jurnal Sinergi Jurusan Teknik Mesin

View Publication Info
Field Value
Title Pengaruh Sudut Punch dan Ketebalan Pelat terhadap Springback pada Bending V
Creator Nur, Rusdi
Suyuti, Muhammad Arsyad
B, Muh Reza
Misbahuddin, Misbahuddin
Description The bent plate is inseparable from the phenomenon that determines the size of the resulting bending angle. This phenomenon is called springback. Springback is a condition that occurs on a sheet plate when bending is done where after the punch load is removed the bent sheet plate has a tendency to return to its original form. Mini brake bending V tool with a hydraulic jack system produces springback of 1-5 degrees for punch angle 85 ° radius 2.5 mm and carbon steel material St 42 at thickness 3, 4 and 5 mm. Therefore, this study was conducted to find out how the influence of punch angle and plate thickness on springback. The limitation problem in this study is the thickness of the plates used 2 and 4 mm. The type of method used is bending V bottoming with a die angle of 90 °, the punch angle used is 80, 85, and 90, the punch radius used is 2, 4 and 6 mm, and the plate material used is carbon steel. The research method starts from designing die set, punch and die test aids, and making test specimens, then bending test, bending angle and springback measurements are carried out. Based on the research conducted, the greater the punch angle, the smaller springback produced and the thicker the plate, the smaller springback produced tends to be smaller, where the smallest springback is obtained on a plate thickness of 6 mm with a punch angle of 90 ° 4 mm radius obtained -0.31o.
Publisher Politeknik Negeri Ujung Pandang
Date 2019-12-04
Type info:eu-repo/semantics/article

Format application/pdf
Source Jurnal Sinergi Jurusan Teknik Mesin; Vol 17, No 1 (2019): April 2019; 57-64
Jurnal Teknik Mesin Sinergi; Vol 17, No 1 (2019): April 2019; 57-64
Language ind
Rights ##submission.copyrightStatement##

Contact Us

The PKP Index is an initiative of the Public Knowledge Project.

For PKP Publishing Services please use the PKP|PS contact form.

For support with PKP software we encourage users to consult our wiki for documentation and search our support forums.

For any other correspondence feel free to contact us using the PKP contact form.

Find Us


Copyright © 2015-2018 Simon Fraser University Library